MyTakeoffOpen the Tool

← MyTakeoff home

Reinforcement calculator: mesh, bars and kg/m³ allowances

For concrete contractors, builders and QSs pricing reinforcement alongside formwork and concrete. Measure the slab on your drawing, then get the mesh area, sheets and weight from it; weigh bars straight from the schedule; or put a kg/m³ allowance against a concrete volume you’ve measured. Every result joins your takeoff with its workings written out.

Watch: Reinforcement Calculator: Mesh Sheets, Bar Weights and kg/m³ Allowances

Mesh, from an area

  1. Measure the slab or ground-bearing floor as an area - or type the area in.
  2. Pick the mesh. The sheet size and mass per sheet fill in, and you can change them to match your supplier.
  3. Add a lap allowance as a percentage. The takeoff quantity is the area plus laps, in m²; the sheet count is rounded up to whole sheets, and the weight is worked out from the mesh area.
MeshStandardSheetkg per sheetkg/m²
A142BS 44834.8 × 2.4 m25.62.22
A193BS 44834.8 × 2.4 m34.83.02
A252BS 44834.8 × 2.4 m45.53.95
A393BS 44834.8 × 2.4 m71.06.16
SL62AS/NZS 46715.8 × 2.4 m33.02.37
SL72AS/NZS 46715.8 × 2.4 m41.02.95
SL82AS/NZS 46715.8 × 2.4 m52.03.74
SL92AS/NZS 46715.8 × 2.4 m66.04.74
SL102AS/NZS 46715.8 × 2.4 m80.05.75

Australian SL mesh is also sold as 6.0 × 2.4 m sheets - change the sheet size if that’s what your supplier stocks. Any other mesh can be added with its supplier’s figures.

Bars, from the schedule

Pick the diameter and enter the number of bars, the length of each and any lap per bar. The weight is number × (length + lap) × kg per metre, added to the takeoff in tonnes.

Diameterkg/mSource
6 mm0.222BS 8666 table
8 mm0.395BS 8666 table
10 mm0.617BS 8666 table
12 mm0.888BS 8666 table
16 mm1.579BS 8666 table
20 mm2.466BS 8666 table
24 mm3.551From the bar size, steel at 7,850 kg/m³
25 mm3.854BS 8666 table
28 mm4.834From the bar size, steel at 7,850 kg/m³
32 mm6.313BS 8666 table
36 mm7.990From the bar size, steel at 7,850 kg/m³
40 mm9.864BS 8666 table

Or an allowance in kg/m³

For early estimates and budget prices: take a concrete volume you’ve measured (or type one in) and apply your own allowance in kg/m³. The result goes in as tonnes.

Worked example

The job from the demo video, on the same drawing as the formwork one - an 18 × 12 m ground-bearing slab with A393 mesh top and bottom:

  • Mesh, bottom layer: 216 m² + 10% laps = 237.6 m²; 237.6 ÷ (4.8 × 2.4) = 20.6, so 21 sheets; 237.6 × 6.16 kg/m² =1,463.6 kg. The top layer is the same again.
  • The same slab in SL92: 237.6 ÷ (5.8 × 2.4) = 17.1, so18 sheets, and 237.6 × 66 ÷ 13.92 = 1,126.6 kg.
  • Ground beam GB1: 8 × 16 mm bars, 10.8 m + 0.8 m lap: 8 × 11.6 × 1.579 =146.5 kg (0.147 t).
  • Pad footings: 12.1 m³ of concrete at a 100 kg/m³ allowance =1,210 kg (1.210 t).

What it doesn’t do

It’s for pricing, not detailing: no bar bending schedules or shape codes, no counting bars off the drawing, and no design. Mesh and bar figures are nominal - check them against your supplier’s.

Try it on your own drawing

Measuring a drawing is free. The calculator is part of the paid plans: a £5.99 24-hour pass for a one-off job, or Pro at £14 a month or £110 a year (all plus VAT). See all plans.

Your drawings are processed in your browser and never uploaded to our servers - the calculator works there too.

Questions

Is the mesh quantity measured net or with laps?

You choose. Enter a lap allowance as a percentage and the takeoff quantity is the area plus laps - the mesh you actually buy and fix. Leave it blank and you get the net area. The sheet count is always rounded up to whole sheets.

Where do the mesh and bar weights come from?

Bar weights are the BS 8666 table values (24, 28 and 36 mm, which that table does not list, are worked out from the bar size at 7,850 kg/m³). UK mesh uses the BS 4483 masses per m² on 4.8 × 2.4 m sheets; Australian SL mesh uses InfraBuild’s published mass per sheet. Figures are nominal - check them against your supplier’s, and edit the sheet size or mass if theirs differ.

My mesh isn’t on the list. Can I add it?

Yes. Choose "Add your own mesh", name it (B503, RL918, trench mesh, anything) and enter the sheet size and mass per sheet from your supplier. It’s remembered on your device for next time.

Does it produce a bar bending schedule?

No. It weighs bars from their diameter, length and number for pricing; it doesn’t do shape codes, bending dimensions or detailing.

Is the reinforcement calculator free?

Measuring a drawing is free, but the reinforcement calculator is part of the paid plans: a £5.99 + VAT 24-hour pass for a one-off job, or Pro at £14 a month or £110 a year (plus VAT).

Related